Ford Fiesta Kitcar
Technical Specification
Donor vehicle: Ford Fiesta XR2 MK3 (1990 - 1996)
Engine: Ford Zetec-E 2,0 16v (Silver Top), 4 cylinders, Bore 85,5mm. Stroke 88mm
Machined cylinder head.
Grp.A Wössner forged pistons, Grp.A PEC forged con rods.
Ferrea racing valves. (inlet 32mm / exhaust 28mm)
Piper Cams - Camshafts (284°/280°), valve springs, valve spring caps,
mechanical cam followers, vernier pulleys, cam belt.
Burton steel flywheel 3,0 Kg.
ARP forged complete engine stud kit.
Jenvey throttle bodies (45mm), Bosch injectors, 4-2-1 exhaust system. (60mm)
Power: 210 Bhp @ 6700 rpm from 102 octane fuel (Aspen R)
Torque: 230 Nm @ 5500 rpm
Transmission: Front-wheel drive.
Sadev ST75-14, 6-speed sequential gearbox with mechanical shift and cut off system.
Sadev plated limited slip differential.
Tilton cerametallic twin disc clutch. (184mm) Hydraulically operated.
Uprated driveshafts, SKF joints.
Suspension: Proflex 3-way dampers. (adjustable low speed, high speed, rebound)
Spherical jointed top mounts front and rear. (Hirschmann)
Forged steel uprights/hubs in front, spherical jointed arms, forged crossmember.
Forged rear beam and machined aluminium rear hubs.
Brakes: Front - 300mm ventilated brake discs with AP Racing Pro 5000+ 4-piston callipers.
Rear - 250 mm brake discs with 2-piston callipers.
Tilton pedalbox. (Adjustable front / rear bias)
Hydraulic handbrake, brake pressure regulator.
Ferodo Racing brake pads.
Steering: Ford Fiesta original power-assisted steering system.
Wheels: Gravel: Compomotive 6,5" x 15" aluminium wheels with 620mm gravel tyres.
Snow: Speedline 5" x 16" aluminium wheels with 650mm snow tyres.
Bodyshell: Unitary construction. Unique composite side panels and bumpers.
Welded T45 steel safety roll cage. Aerodynamic rear wing. Polycarbonate side windows.
Interior: Sparco Pro ADV seats, Sabelt 6 point safety belts, flocked dash, full carbon interior.
Electronics: DTA S 60 PRO engine management system. (Installed and tuned by Albert Särg)
Innovate Motorsport wideband controller.
Sparco digital dash / VDO tachometer.
Wires covered with nylon robe.
Fuel Tank: FIA FT3-1999 specifications, 45 litre capacity.
Dimensions: Weight: 902,5 Kg (with spare wheel)
Only done 50 km-s since new!
Big package of spare parts and wheels.
Contact for other information!
Country: Estonia
Contact Tel No: +372 53 450 773
Website: www.crc.ee
[/img]
