Hej!
Har en Meziere vattenpump att sälja. Den har gått väldigt lite, max 20 timmar.
Det är alltså en remote, universal pump som går att placera vart som helst på bilen. Egen tillverkad sug-anslutning YD 40 mm och två AN anslutningar medföljer. Org. elkontakt med säkring är kapad men följer med.
Lite data, saxat från Jegs:
Meziere WP116SHD Details
100 Series
42 GPM Free-Flow Rating
Features:
Remote mount bulkhead design for universal fit
Suitable for street or drag strip use - 3000+ hour life expectancy
Show quality finish
Heavy Duty motor provides 42 gallons per minute free flow rating
Stainless steel hardware and 4130 mounting bracket included
Single inlet port threaded 1'' NPT to accept our standard inlet fittings
Dual outlet ports threaded #12AN for a wide variety of line connection options
Dual outlet ports provide tandem outlet lines perfect for V6, V8 or V10 applications
Light weight. Complete standard unit weighs only 5.5 pounds!
Stainless steel large diameter main shaft with high performance ceramic seal
1'' NPT inlet adapters available for -12AN, -16AN, -20AN, 1-1/4'', 1-1/2'' or 1-3/4'' slip hose
-12AN o-ring style outlet fittings available for -10AN, -12AN, -16AN, 5/8'', 3/4'', 1'', or 1-1/4'' slip hose.
Technical Specifications:
Finishing The System: This pump is supplied complete with hardware but without the inlet and outlet fittings. The fittings need to be ordered according to the type and size of the desired hose connections.
Amperage draw: Under normal use the pump will draw 6-7 amps.
Overall Height Dimension: The standard pump is 5.00'' long from the mounting surface to the tip of the pump. The heavy duty pump is 5.50'' long from the mounting surface to the tip of the pump.
Pump Weight: This application weighs 5.5 lbs.
Care should be taken that the pump not be run while charging.
Additional Notes: The standard 35 GPM pump is suitable for normally aspirated engines up to 650HP. Supercharged, turbocharged and high compression, high horsepower applications should use the 55GPM High Flow pump only. This model does not accept heater or bypass hoses as a standard.
Specifications:
Amp Draw
8.00 amps
Flow Rate @ 12 Volts (gpm)
42 GPM
Hose Adapter Included
No
Hose Adapter Required
Yes
Hose Adapter Thread Size (in.)
1 NPT
Overall Depth (in.)
5.5
Pump Material
Aluminum
Quantity
Sold individually
Pump Finish
Black anodized
Weight (lbs.)
6.4
Manufacturer's Part Number:
WP116SHD
Kostar 325 dollar ny i USA (+tull, moms, frakt osv)
Hämtas strax utanför Tierp eller mitt i Gävle. Kan skickas.
Mvh Jonathan Westerlund, Tierp


