S: SPEC Koppling/Svänghjul till M5 E39 (mfl) [SÅLD]

SPEC Koppling/Svänghjul till M5 E39

Nytt i kartong;

SPEC Komplett koppling Steg 3+ (SB633F)
samt SPEC lättviktssvänghjul SB63A (alu)
obs! "single mass"

Nypris ca 20'000:-
Prisidé: 12'500:-

Bud över 10k då? - obs NYTT - bara kopplingen kostar 10k.....

Hej,

Har du bild så man kan se hur det ser ut? Diameter på kopplingen och vikt på svänghjulet?

edit: googlade lite och hittade bilder och Spec's hemsida, men inga tekniska data...

Kopplingen;



Rated Torque: 713 ft.lb (900+nm)
Diameter 240mm (Std 540/M5 mfl)

Types of Driving:
Street, Drag, Pulling, Autocross

The flagship stage for a high powered street or race car that requires a manageable and friendly engagement, the stage 3+ features a carbon semi-metallic full faced material that offers unparalleled life, friction co-efficient and drivability characteristics in one single package. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Great for street, drag, drift, autocross, road racing, pulling, rallye and drift.

* High clamp pressure plate
* Carbon semi-metallic friction material
* High torque sprung hub and disc assembly
* Bearing and tool kit


Svänghjulet;


SB63A
Weight 13.00 lbs (5.8 kilo)

The automotive component most responsible for insuring optimum clutch performance and life is the flywheel. The flywheel's contribution to power transfer is three-fold.

Firstly, the flywheel should provide a consistent and friction enhancing surface for the clutch disc.
Flywheels also aid in proper inertia, which is determined by the flywheel weight. Inertia controls the ratio of power to acceleration and can make a vehicle faster or slower based on gear ratio, tire type, vehicle weight, power output and even the location in the powerband output is achieved. The weight of a flywheel and amount of inertia it provides can also effect drivability.
Lastly, the flywheel must provide a true balance at rpm, which means no dimensional runout that produces engine damaging and power robbing vibrations and allows smooth engine revolutions.

SPEC flywheels are CNC manufactured at an unheard-of .001 tolerance, in an industry where the standard is .010. This precision manufacturing process ensures perfect balance and a perfectly flat bedding surface for the clutch disc, both of which also contribute to the ultimate in safety for competitive environments. All SPEC flywheels carry SFI certification. (sfi link)

To allow for specific inertia needs, SPEC flywheels are made in high carbon billet steel and aircraft quality billet aluminum. The aluminum and most steel SPEC units are rebuildable and feature a replaceable steel friction plate that is made from a friction- enhancing steel metal specially formulated for optimum clutch bedding and holding power. The aluminum and steel materials provide a light and medium weight option for all types of racing. SPEC spends a lot of time and effort on research and development of optimum flywheel dimensions and weights for all types of driving and racing and can optimize your MOI (moment of inertia) to maximize your car's output and performance.

10'000:- vid snabb affär. - obs! allt är helt nytt i kartong.

Säljer du svänghjulet löst? pris?

Re:

Robert Larson skrev:

Säljer du svänghjulet löst? pris?

Nej helst inte, eftersom jag vet att det "lirar" ihop.

Jag köper det av dig för 10 000 kr

Ring mig 0707946697

Fortfarande till Salu. - bud?